This One Station Thermoforming Cup Making Machine is a trim-in-place type thermoforming machine which takes advantage of mould with rules steel knife for performing forming and cutting in the same station. and the second and the third cut-station are available for performing fuction of post-trim and hole-punch.
Thermoforming machinery is perfect for making part of PP PET PS etc and completely automatically produces disposable rectangular or square or round shaped roll-edged containers and trays with forming, trimming, and stacking conveying on one operation cycle.
1.Thermofomring machinery Use Steel-Rule-knife for performing forming and cutting in the same station.
2.This cup thermoforming machine automatic stacking ,counting unit and conveying system
3.Trim-in-place for parts with rolled edge (turn-down lip)
4.Technology of trim-in-place brings a neat and identical trimming(cutting)
5.Plug assistant for deep forming of draw
6.Floating knife and free knife are available for post-trimming film with high shrinkage rate.
7.Extra Contact Heat plate for Minimizing power consumption is available.
|Maximum forming area||703×513 mm||765×575 mm|
|Minimum forming area||260×250 mm||375×270 mm|
|Maximum mold dimension||728×538 mm||790×600 mm|
|Maximum mold weight||150 kg||300 kg|
|Height over sheet material forming part||75 mm||150 mm|
|Height under sheet material forming part||50 mm||120 mm|
|Dry cycle speed||45 cycles/ min||45 cycles/ min|
|Maximum film width||760 mm||820 mm|
|Operating pressure||6 bar||6 bar|