| Speed | 10-35 cycle/min；6~15 cavity/cycle |
| Capacity | 13500 pcs/hr（e.g. 15 cavities, 15 cycles/min） |
| Max. forming area | 470*340mm |
| Max. forming depth | 55mm |
| Traction | 60~350mm |
| Material | PP/PET/PVC (please inform us in advance if you will use this machine for PS material) 0.15-0.60mm（sheet roll holdingscrew φ75mm） |
| Heating power | Top heater：26kw bottom heater：16kw |
| Main motor power | 2.2kw |
| Total power | ≈48kw |
| Air capacity | >0.6m³（self-prepared） pressure: 0.6-0.8Mpa |
| Mold cooling | 20℃, tap water recycling |
| Dimension | 6350×2400×1800mm（L*W*H） |
| Weight | 4245kg |
Lid Making Machine HEY04B
Lid Making Machine Introduction
The lid making machine includes forming, punching & cutting, automatic process operation, advanced technology, safe and easy operation, to avoid the labor consumption caused by manual punching in the past and the pollution caused by the contact of employees during work, to ensure the quality requirements in the production process of the product, the equipment adopts the plate heating production power consumption is small, the appearance covers a small area, economical and practical, widely used in food, medicine, hardware and other industries production.
Lid Making Machine Features
1. Plastic lid making machine: through the organic combination of programmable controller (PLC), human-machine interface, encoder, photoelectric system, etc., intelligent control is realized, and the operation is simple and intuitive.
2. It adopts coaxial mechanical transmission mode, and the synchronization performance is reliable and stable.
3. The automatic lifting feeding system is safe and labor-saving, the radial upper and lower preheating device has stable temperature control, uniform heating, intelligent and reliable servo traction, the punching and punching knives are durable and burr-free, the mold is easy to replace, and the host adopts frequency conversion speed regulation and runs smoothly.
4. The heating method adopts matrix-shaped heating tile infrared radiation heating, and the high-precision temperature control system is used for temperature control.
5. The traction adopts full-tooth chain fixed-point servo traction, and the chain guide rail is equipped with a cooling system for heat-treated aluminum profiles, with accurate stroke positioning and high service life.
6. The plane connecting rod mechanism is used to transmit large force, small inertia, stable operation, equipped with servo system intelligent control, the laser tool used is small in size, low in cost, easy to adjust and replaced, and the finished product is smooth and burr-free after pressing and cutting.
7. This Cup Lid Thermoforming Machine is also equipped with a powerful servo automatic stacking system, which can greatly save labor costs for the majority of users.
8. The appearance of the whole machine is sprayed with plastic, and the appearance is beautiful and generous.
Technical Parameters
Applications
