This automatic Plastic thermoforming machine integrated type and cutting are completed in one station, which is especially suitable for sheet molding with large shrinkage such as PP. thermoforming machine can be widely used in the processing and production of air pressure forming sheets, such as PP, APET, CPET, PS, PVC, OPS, PEEK, PLA and other materials. Through lower production costs, maximize production output.
1. The pp thermoforming machine is precise, reliable, simple to operate, and has significant advantages of high efficiency, high quality and low cost.
2. Integrated forming (in-mold cutting), stacking, and waste rewinding stations, sheet material processing is smoother, and energy consumption is lower.
3. The full-automatic plastic cup thermoforming machine: solid cast iron structure is used for forming, and the crank arm equipped with roller bearings ensures perfect forming and cutting.
4. The worktable on the forming station is equipped with an independent servo-driven auxiliary stretching head to make the product forming more in place.
5. The forming station adds a tension rod structure, so that the forming station has the function of in-mold cutting, while ensuring the longer service life of the cutting knife.
6. PP Plastic Thermoforming Machine stacking method includes: stacking up, stacking AB, product is completely cut and taken out by robot, etc.
|Maximum forming area||760×540 mm||760×540 mm|
|Minimum forming area||375×350 mm||375×350 mm|
|Maximum mold dimension||780×560 mm||780×560 mm|
|Height over sheet materialforming part||150 mm||150 mm|
|Height under sheet material forming part||150 mm||150 mm|
|Dry cycle speed||45 cycles/ min||45 cycles/ min|
|Maximum film width||810 mm||810 mm|
|Operating pressure||6 bar||6 bar|