| Cycle speed maximum (with good CN mold) | Forming and cutting production cycle of up to 30 cycles/min. Single forming production cycle of up to 35 cycles/min. |
| Dry cycle speed | 45 cycles/min |
| Forming area maximum | 850x650mm |
| Forming area minimum | 400x300mm |
| Closing force (Forming station) | 400KN |
| Height of formed part above or below film level | 125mm/110mm |
| Forming station Top / Bottom table movement | 235mm |
| Film thickness range (depending on film properties) | 0.2-2mm |
| Film width maximum (parallel rails) | 880mm |
| Operation pressure | 6bar |
One Station Forming Machine with Punching Machine GTM03
Forming Machine Main Technical Data
| Cutting, Punching, Stacking | |
| Max. Cutting Area (mm2) | 930mm*270mm |
| Max. Mould Area (mm2) | 1150mm*650mm |
| Max. Mould Weight | 1400KG |
| Max. Formed Depth (mm) | 125mm |
| Dry Speed (cycle/min) | Max 30 |
| Max. Dia. Of Sheet Roll (mm) | 950mm |
| Force of impact | 30 ton |
| Machine Dimensions | 5700X3600X3700MM |
| Machine Weights | 9 ton |
single station thermoforming machine advantage point
1.Integrated forming, punching, stacking, and waste re-winding station, sheet stock treatment is more smooth, and energy is saved.
2.Forming and cutting stations are used with firmly cast iron structure, matched with roller bearing's crankshaft to guarantee perfect forming, cutting.
3.Forming station with independent servo-plug drive on upper table, gives you more flexible to adjustthe process, gets the best products.
Applications
