|
Model |
GT-N01B-1 |
GT-N01B-2 |
GT-N01B-3 |
|
Measuring range |
0~16,000mN |
0~32,000mN |
0~64,000mN |
|
Basic pendulum |
200gf |
800gf |
1600gf |
|
Weight pendulum |
400gf, 800gf, 1600gf |
1600gf, 3200gf |
3200gf, 6400gf |
|
Resolution |
0.1N |
||
|
Accuracy |
±1% |
||
|
Unit |
mN, gf |
||
|
Grip size |
Width 74.8mm±0.1mm, height 15mm±±0.1mm |
||
|
Specimen dimension |
50×63mm or 63×76mm |
||
|
Human-computer interface |
5 inch color touch screen |
||
|
Printing |
Thermal printer, 9-pin RS232 serial data output |
||
|
Power Supply |
220VAC,50Hz |
||
|
Dimensions |
480×270×560mm (LxWxH) |
||
|
Weight |
25 kg |
||
Paper Tearing Strength Tester GT-N01B
Description
This tester is designed to measure the tearing strength of paper and cardboard. It can also be used to assess the tearing resistance of leather, film, metal foil, textiles, and other composite materials in sheet form.
Paper Tearing Strength Tester Standards
ISO 1974, ISO 6383-2, TAPPI414, TAPPI496, ASTM D689, ASTM D1922, GB 455, GB16578.2Key Features
Pneumatic Sample Clamping & Pendulum Release: Ensures precise testing by eliminating human-induced systematic errors.
Standard RS232 Interface: Facilitates seamless external system integration and data transmission.
Clamp Specifications: Width: 74.8 mm, Sample Size: 63 × 76 mm (standard).
Stopper Block: Enables accurate alignment of 63 × 50 mm samples with the center of the clamping ports.
Automatic Reset: If manually pulled back less than 0 degrees after release, the pendulum release device resets automatically.
Tearing strength tester testing directions:
Horizontal & Vertical: For directional materials.
Undefined: For non-directional materials (e.g., thin films), recording 50 results each for horizontal and vertical directions.
Standard RS232 Interface: Facilitates seamless external system integration and data transmission.
Clamp Specifications: Width: 74.8 mm, Sample Size: 63 × 76 mm (standard).
Stopper Block: Enables accurate alignment of 63 × 50 mm samples with the center of the clamping ports.
Automatic Reset: If manually pulled back less than 0 degrees after release, the pendulum release device resets automatically.
Tearing strength tester testing directions:
Horizontal & Vertical: For directional materials.
Undefined: For non-directional materials (e.g., thin films), recording 50 results each for horizontal and vertical directions.
Technical Parameters
Accessories
|
Standard accessories |
1set |
Basic pendulum (Already fixed in the equipment) |
|
1set |
Weight pendulum (Provided as per measuring range) |
|
|
1set |
Calibration weight |
|
|
1pc |
Ø8 PU Tube |
|
|
4 rolls |
Thermal printer paper |
|
|
Optional accessories |
1set |
Sample cutter (No available for plastic film) |