Paper Cup Stiffness Tester GT-N77: A Basic Knowledge Guide
Paper Cup Stiffness Tester GT-N77: A Basic Knowledge Guide
Paper cups are disposable containers, usually used for holding beverages or food, and are widely applied in gatherings, catering, takeout, and other occasions. Paper cups are widely welcomed because of their light weight, low cost, and convenience.
Because paper cups are widely used, the stiffness of paper cups has become increasingly important. When there is liquid inside the paper cup, if the paper cup cannot bear a certain weight, it may become soft or even leak. If the cup contains hot water, a softened paper cup may cause scalding. Therefore, paper cup stiffness testing is required. Only paper cups with a certain load-bearing capacity are safe. For this reason, a paper cup stiffness tester is needed to test the stiffness of the paper cup body.
Paper Cup Stiffness Tester GT-N77
Paper Cup Stiffness Tester GT-N77 is a physical performance testing instrument specially used to test the stiffness performance of paper cups. It is suitable for various quality control and testing scenarios. This equipment has a clear and stable application positioning in the paper cup industry:
It is used to test the stiffness of paper cups, a necessary physical performance testing instrument for paper cup manufacturers, food enterprises and quality inspection departments.
Advantages of Paper Cup Stiffness Tester
Touch screen control system: user-friendly interface and easy operation.
Real-time test curve display: during the test, force value changes can be dynamically displayed, which is convenient for analyzing the structural performance of paper cups.
Dual measuring head structure design: improves testing accuracy and makes test data more precise.
Automatic overload return function: when the test exceeds the set range, the Cup Stiffness Tester can automatically return to the initial position, protecting the instrument and improving operational safety.
Micro printer configuration: enables quick printing of test results.
Standard RS232 interface: convenient for connection to computers and local area networks.
How to Operate Paper Cup Stiffness Tester
Enter the "SETTING" interface. Confirm the test parameters. You can change "TestSpeed" and "Elong Reach", while other parameters don't need to be modified.
Note: The test point should be at the 2/3 position on the cup.
Place the cup.
Use the handle to adjust the height of the clamp to place the test point in the required position.
Use the ratchet wrench to adjust the clamp to hold the cup.
Use the "HANDLE" to control the position of the push rod so that it is approximately 5 mm away from the cup.
Click "Esc" to return the home interface. Click "ZERO" to set the current position of the push rod as the 0 point.
Click "TEST" to start testing.
When the test is over, click "OPEN" to check the test data.
Click "PRINTALL" to print all the data.
Overall demonstration of the test.